Firmware Lumikit PRO X 4
(c) Luís Augusto Spranger
===============================================================================
Versions history
===============================================================================

1.7 - November 23, 2018
      a) ArtDMX has variable length, according to the DMX input. If the interface
	     receives 192 DMX channels, it will send an ArtNET package with 192 DMX
		 channels.
***
1.6 - October 27, 2017
      a) fixed problem when configuring the Art-NET universe of connector 3 by
         Art-NET config;
***
1.5 - May 24, 2017
      a) added support for DMX input on connector 3 on the PRO X4i model;
	  b) support for browser configuration;
***
1.4 - March 14, 2017
      a) solved issues with some Flash drivers.
***
1.3 - September 11, 2016
      a) in the ArtAddress package: do not program the universe if the value
         received is 0x7F (according to the Art-Net 3).
***
1.2 - Oktober 27, 2015
      a) added option to send ArtDmx packages when the active mode is PLAYBACK:
		 - only universe 0;
		 - create a file named "AN" on the Pen Drive to use this function.
***
1.1 - March 29, 2015
    a) added option to force network communication at 10Mbps, this is the
    interface standard (after the first installation of this firmware).
    To change between settings press and hold the button 
    "ART-NET/CHANGE Univ." pressed while the interface is connected, 
    at this point check the LEDs IP and UNIV:
    * If the LEDs IP and UNIV blink 5 times, the interface will work 
        in 100Mpbs or 10Mpbs;
    * If the interface start normally without IP LEDs and UNIV
        blink, the interface will force 10Mbps speed in network communication.
    b) correction of error when deleting the last recorded program on Flash Drive
    using the remote control App (iOS and Android).
***
1.0 - April 1, 2014
    a) the initial version.